Dual Junction Series
Dual Junction Coaxial Series
| Part Number | Frequency Range (GHz) | Bandwidth (MHz) | Insertion Loss (dB) Max. | Isolation (dB) Min. | VSWR Max. | Forward Power (W) | Connector Type |
Dimensions L×W×H (mm) |
|
| KTCC-0101AS | 0.14-0.25 | 10 | 1.2 | 36 | 1.30 | 100 | SMA/N | 140×70×22 |  |
| KTCC0301S-100 | 0.25-0.50 | 40 | 0.8 | 40 | 1.25 | 100 | SMA/N | 104×57.5×22 | |
| KTCC-0701S | 0.5-1.0 | 70 | 0.8 | 46 | 1.2 | 100 | SMA/N | 70×38×20 | |
| KTCC-101S | 0.8-1.4 | 100 | 0.6 | 46 | 1.20 | 100 | SMA/N | 60×33×20 | |
| KTCC-101AS | 1.2-2.5 | 200 | 0.6 | 46 | 1.20 | 100 | SMA/N | 50.8×28.5×20 | |
| KTCC-201FS | 2.0-4.0 | 300 | 0.8 | 46 | 1.20 | 50 | SMA | 50×25×15 | |
| KTCC-401AS | 3.5-8.0 | 600 | 0.8 | 46 | 1.20 | 50 | SMA | 32×21×14 | |
| KTCC-801S1 | 7.0-20.0 | 1500 | 0.8 | 40 | 1.25 | 10 | SMA | 25.4×20×13 | |
Dual Junction Drop-in Circulators
| Part Number | Frequency Range (GHz) | Bandwidth (MHz) | Insertion Loss (dB) Max. | Isolation (dB) Min. | VSWR Max. | Forward Power (W) | Connector Type |
Dimensions L×W×H (mm) |
|
| KTDC-0702MS | 0.5-1.0 | 75 | 0.8 | 46 | 1.20 | 100 | TAB | 70×38×13 | |
| KTDC-0902MS | 0.8-2.2 | 70 | 0.8 | 46 | 1.20 | 50 | TAB | 40×20×8.5 | |
| KTDC-102MS | 0.8-2.2 | 70 | 0.6 | 46 | 1.20 | 100 | TAB | 50.8×28.4×10 | |
| KTDC-102MS3 | 1.2-3.8 | 200 | 0.6 | 46 | 1.20 | 100 | TAB | 38×19×8 | |
| KTDC-202MS8 | 1.8-3.5 | 300 | 0.8 | 40 | 1.25 | 30 | TAB | 26×13×7 | |
| KTDC302CS2-A | 3.0- 7.0 | 500 | 0.8 | 40 | 1.25 | 100 | TAB | 25.4×12.7×6.4 | |
Notes:
1) All the above specifications are at room temperature (25℃±5℃).
2) Standard P/N is Clockwise (CW) Rotation. Add letter “R”at the end to P/N for a Counter Clockwise (CCW) Rotation.
3) Product information are subjectto change without notice.
Dual Junction Coaxial Series
RF Isolators and circulators are ferrite devices with either two or three ports, with the input signal entering any port transmitted in a specific direction. These components are used in amplifier systems, radar systems, antenna transmitting/receiving, and in anything else that may require the prevention of any signal reflection.
Kete Microwave supplies a series of RF drop-in circulators from 108MHz to 24.5GHz, the bandwidth from 10MHz to full. These devices are made of magnets and ferrite material. We offer ferrite devices with high quality and stable performance over a long period of time. The devices have a temperature range from -40℃ to +85℃, high reverse power of RF isolators from 2W to 250W. All devices are available RoHS Compliant. They are widely used in remote sensing, radar and communications etc. If your requirement is not covered in the following table, please directly contact with Kete.
Dual Junction Drop-in Circulators
Kete Microwave offers dual junction drop-in isolators with high quality and stable performance are done over a long period of time. All devices are available RoHS Compliant. Customize products are available for different load positions. Please contact Kete for other specifications .